9000 BTU 23 SEER2 Wi-Fi Enabled Ductless Mini Split

Model # MSCT-09HAC1 

SYSTEM INCLUDES

• Indoor Unit- Air Handler.
• Outdoor Unit-precharged with R410A.
• LCD Remote Control.
• Free 16 ft (5 m) Lineset and interconnecting wire.
• Installation Kit.
• Instruction Manual + WiFi Manual

FEATURES

• Classic America WiFi Alexa Ready Ductless Wall Mount Mini Split Inverter Air Conditioner with Heat Pump, Full Set (9000 BTU 23 SEER2 120VAC), Includes Installation Kit
• Energy Star; Meets Most Efficient 2024 criteria.
• The mini split system comes with WiFi Control compatible with Alexa. You can control from any smart device. (WiFi manual included in the indoor mini split ac unit)
• Uses 110-120 VAC electrical power, 23 SEER2 High Efficiency Rating, ETL Approved. Pre-charged with R410A refrigerant. Nominal Current Draw: under 7 amps
• The indoor mini split air conditioner and heater unit has a modern and sleek appearance. The outdoor unit provides a powerful, dependable and efficient performance.
• The indoor unit is 32.28x7.68x12.05 in (WxDxH). The outdoor unit is 28.66*12.01*21.65 in (WxDxH). For more dimensions hover over the pictures.
• High Efficiency wall mounted Ductless Mini Split AC/Heating system. Use for both cooling /heating - 9000 BTU/hour with 23 SEER2 and 9 HSPF2 (IV) efficiency
• The mini split air units come with an easy Installation Kit (16 ft of refrigerant lines and inter connecting wires) and a wireless remote controller included. Professional Installation is highly recommended for our ductless mini split ac!
• The 9000 BTU mini split ac/heating system  comes with an Installation Kit which includes: 16 Feet Insulated Copper Refrigeration Tubing, Power & Interconnecting Cables, Pipe Wrap, Wall Sleeve Pipe
• Classic America mini split 9000 btu air conditioner and heat pump provides the highest degree of quality, efficiency and performance in a modern and simple package.
• This new model has drop down extender bars that will keep the unit angled while you work the connections! You do not have to fight with keeping the indoor unit angled like most units in the market? 
• Tired of fighting with the flap to remove the filters for cleaning like most units in the market? We heard you! Air intake through the top for easy filter removal and cleaning
• Easy bottom plate that comes right off for easy cleaning of the interior duct, deflector and fan. Do not worry about having to disassemble the whole indoor unit just to clean the mouldy tray

DESCRIPTION

The installation of a Classic America ductless mini split heat and air conditioner unit is easily accomplished with a licensed HVAC technician. Classic America mini split-system air conditioners heat or cool a room in a house quietly, effectively and most important: efficiently. Included with the split system ac is a wireless remote controller which allows the user to select among 5 operating modes; Auto, Cool, Heat, Dry and Fan. The Automatic Switch Over mode allows an automated operation. The mini split system comes with WiFi Control compatible with Alexa. You can control from any smart device. (WiFi manual included in the indoor mini split ac unit).

Timer function powers off the mini splits heating and cooling after a period of time, saving you money. The indoor mini split heat pump display can also be dimmed for nighttime sleeping rooms. In case of a temporary power outage Auto Restart function restarts the split system air conditioner to continue running the same way after power is returned to the mini split unit. Finally, the air louver automatically swings sending airflow throughout a room rather than in a single direction. FEATURES LIST: Sleep Function, Timer, Automatic Air Swing, Automatic Switch Over, Three Speed Fan, Energy Savings of up to over 30% compared to conventional minisplit air conditioners, Innovative temperature-monitor thermistor protection device that causes freeze prevention. Low temperature PTC Strip allows the ac unit split system to operate in heating down to -13F outdoor temperature.

WARRANTY

Installation of a mini split must be completed by a licensed HVAC company to ensure any issues encountered in the future are not due to improper installation/workmanship. The installation includes electrical, gas and refrigerant connections as regulated by laws, codes and guidelines at the federal, state and local levels. If it is determined that the unit is not functioning due to a manufacturing defect, a replacement part will be sent free of charge up to 1 year from date of shipment of the unit. 

SHIPPING

This item ships via UPS Ground. Signature WILL be required for the outdoor unit. If you do not want signature required, please let us know in the order notes during checkout. If you decide to purchase more than 1 unit, it will ship on a pallet via freight. Contact us if you would like to order more than 1 so we can schedule and coordinate the shipment for you.

TUYA APP Links:

iPhone: https://apps.apple.com/us/app/tuya-smart/id1034649547

Google Play: https://play.google.com/store/apps/details?id=com.tuya.smart&hl=en_US

ERROR SIGNALS THAT DISPLAY ON YOUR UNIT

Understanding the error codes that display on the Indoor Unit.

• E0 - (Common at Start Up) - Lost Communication between Indoor and Outdoor Units (If at initial startup, check for miswiring or broken or disconnected Cable #1, Leftmost of 3, may be labelled differently)
• E1 - Indoor Temperature Sensor Fault
• E2 - Indoor Pipe Temperature Sensor Fault
• E3 - Outdoor Pipe Temperature Sensor Fault
• E4 - Refrigerant System Leakage or Fault
• E6 - Malfunction of the Indoor Fan Motor
• E7 - Outdoor Air Temperature Sensor Fault
• E8 - Outdoor Discharge Temperature Sensor Fault
• E9 - Outdoor IPM Module Fault
• EA - Outdoor Current Detect Fault
• EE - Outdoor PCB EEPROM Fault
• EF - Outdoor Fan Motor Fault
• EH - Outdoor Suction Temperature Sensor Fault
• FX - Advanced Troubleshooting Codes - Contact Tech Support for Assistance
• P4 - Compressor Overload (If at initial startup, check that refrigerant valves are open)

WARNING SIGNALS ON THE DISPLAY

• CL - Clean Filters

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Changing the temperature display from Fahrenheit to Celsius degrees or vice versa (F to C)

Step 1. Turn off the unit, by pressing the TEST button on the power plug. Wait for 2 minutes, then press the RESET button on the power plug. Follow with steps 2 and 3 within 3 minutes.

Step 2. Turn on the unit, and set the unit to Cool mode, medium fan speed & 86F (or 30C) temperature.

Step 3. Press the SLEEP button on the remote 8 times within 8 seconds, while pointing the remote towards the unit display.
Wait about 15 seconds and you should hear a beep from the unit, and the displayed temperature should change from Fahrenheit to Celsius degrees or vice versa. Repeat these steps to revert the change.

PLEASE NOTE: AFTER CHANGING UNITS THE AC MAY ENTER ECO (ENERGY SAVINGS) MODE. USE THE MODE BUTTON TO GET IT BACK TO COOL

The Key to Maximum Efficiency: Proper Mini-Split Sizing

When it comes to mini-split systems, one of the most critical factors determining their performance, efficiency, and overall effectiveness is proper sizing. These compact and versatile heating and cooling solutions are designed to provide targeted comfort while minimizing energy consumption, but only when they are sized correctly for the space they serve.

Undersizing: A Costly Mistake
An undersized mini-split system will struggle to adequately heat or cool the designated area, resulting in constant operation and increased energy consumption. Not only does this lead to higher utility bills, but it also puts unnecessary strain on the system components, potentially reducing their lifespan and increasing maintenance costs.

Oversizing: Equally Problematic
On the other hand, oversizing a mini-split system can be just as detrimental. An oversized unit will cycle on and off more frequently, leading to inefficient operation and potential temperature fluctuations within the space. This short-cycling not only wastes energy but can also contribute to premature wear and tear on the system.

The Importance of Load Calculations
To ensure proper sizing, it is essential to conduct a thorough load calculation for the specific space where the mini-split will be installed. This calculation takes into account various factors, including:

Square footage of the area
Insulation levels and air tightness
Window size and orientation
Number of occupants and internal heat sources
Local climate conditions
By considering these factors, an HVAC professional can accurately determine the heating and cooling requirements of the space and select a mini-split system with the appropriate capacity to meet those needs efficiently.

Zonal Comfort and Efficiency
One of the key advantages of mini-split systems is their ability to provide zonal temperature control. With multiple indoor air handlers, you can create customized climate zones within your home or commercial space. However, this benefit can only be fully realized when each zone is properly sized and equipped with the right number and capacity of air handlers.

Failing to properly size and distribute the air handlers can lead to hot or cold spots, uneven temperature distribution, and inefficient operation, negating the very benefits that make mini-split systems so appealing.

Professional Expertise for Optimal Results
While it may be tempting to attempt sizing and installation on your own, it is highly recommended to work with qualified HVAC professionals. These experts have the knowledge, experience, and specialized tools to accurately assess your specific needs and recommend the most suitable mini-split system and configuration.

From conducting detailed load calculations to ensuring proper installation and commissioning, a professional HVAC contractor can help you maximize the efficiency, performance, and longevity of your mini-split system.

The Long-Term Benefits of Proper Sizing
Investing in a properly sized mini-split system may require a slightly higher upfront cost, but the long-term benefits far outweigh this initial expense. A correctly sized system will operate at peak efficiency, minimizing energy consumption and utility costs, while providing consistent and comfortable temperatures throughout your living or working space.

Additionally, proper sizing helps extend the lifespan of your mini-split system, reducing the frequency of costly repairs and replacements. By taking the time and effort to size your system correctly, you'll enjoy years of reliable and efficient heating and cooling, as well as significant cost savings over the life of the equipment.

In the world of mini-split systems, proper sizing is the key to unlocking maximum efficiency, comfort, and long-term value. By working with professional HVAC experts and prioritizing accurate load calculations, you can ensure that your mini-split system delivers on its promise of targeted climate control, energy savings, and exceptional performance for years to come.

More Reading

How Mini Splits Can Help You Save Money During the Summer

Leveraging Mini-Split Systems for Effective Dehumidification

Maximizing Savings: Tips and Tricks for Efficient Mini-Split Cooling

Smart Mini-Splits: Revolutionizing Home Comfort and Energy Efficiency

How a Mini Split System Can Transform Your Garage into a Cool Oasis

The Benefits of Mini-Split Systems for Climate Controlled Storage